חדשות ואירועים

ברוכים הבאים לאתר גאיה יבוא ושיווק מכונות בע"מ
כל האירועים והעדכונים על מוצרים חדשים ומבצעים תוכלו למצאו אותם כאן
משורי סרט MEP במבצע ענק לרגל השנה החדשהמשורי סרט דור חדש דו עמודי –חשמלי הידראולי עם הזנת חומר ממוחשבת CNC לחיתוך ישר לפרופילים חומר מלא וצינורות לרבות פלדה . פלדה קשה ונירוסטה רמת דיוק לעיבוד שבבי

קטלוג גאיה 2014

הורד קטלוג

ראשי  /  מכונות לעיבוד מתכת  /  ערגול BENDMAK  /  מכונות ערגול צינורות ופרופילים
מכונות ערגול צינורות ופרופילים
מפרט המוצר הורד קטלוג להרחבה
 

 

 

  

 

PRO-120


Bendmak PRO-120 

*Explanations: 
A: Standard rolls. 
B: Special rolls. 
C: Pulling device 
D: For bending without deformation and for serial production special rolls are required 
E: Angle device 
F: Pulling device
Standard Features: 
• Machine body is steel (St-52) construction 
• Shafts made of special steel (42 CrMo4), hardened and grounded 
• Horizontal and vertical working 
• Electrical and hydraulic protection against overloads 
• Digital display for bottom rolls 
• Lower rolls can move up and move down with hydraulics 
• Separate and portable control panel 
• Manuel lubrication 
• In accordance for "CE" 

Optional Accessories: 
• Special profile rolls for pipe, profile and angle materials 
• Spiral bending device 
• Variable speed of rotation 
• Adjustable hydraulic guide rolls in two directions 
• Mechanical guide rolls for angle bending 
• NC playback control system 
• CNC graphic control system
PRO-120 Technical Infos PRO-120 Contact for this productPRO-100 (Compare With)
Profiles Sizes Ø * Profiles Sizes Ø * Profiles Sizes Ø *
  50x50x5
100x100x10
120x120x15
650
1100
1300
A
E
F
  75 800 A
F
  UNP 240 1200 A
D
F
  50x50x5
80x80x8
120x120x15
650
900
1300
A
E
  85 900 B   INP 240 1200 A
D
F
  120 1200 A   50x2
160x4
600
3000
B   HEA 140
HEB 120
1200
1300
A
D
F
  100 1200 A   101.6x12
139.7x5
1200
1600
B   UNP 100 8000 C
B
  130 1300 A   140x50x5   B   INP 120 2500 C
B
  40x10
125x25
140x30
500
850
3000
A
F
  90x90x8   B   HEA 120
HEB 100
2600
1500
C
B
  200x50 1000 A
F
  UNP 240 1000 A
D
F
       

PRO-100

Hydraulic Profile Bending Machine

PRO-100 Click for Technical Informations.

Bendmak PRO-100 
*Explanations: 
A: Standard rolls. 
B: Special rolls. 
C: Pulling device 
D: For bending without deformation and for serial production special rolls are required 
E: Angle device 
F: Pulling device
Standard Features: 
• Machine body is steel (St-52) construction 
• Rolls are driven by hydraulic motor + planetary gearbox and gears 
• Shafts made of special steel (42 CrMo4), hardened and grounded 
• Side guide rolls are manual adjustable 
• Horizontal and vertical working 
• Electrical and hydraulic protection against overloads 
• Digital display for bottom rolls 
• Lower rolls can move up and move down with hydraulics 
• Separate and portable control panel 
• Manuel lubrication 
• In accordance for "CE" 

Optional Accessories: 
• Special profile rolls for pipe, profile and angle materials 
• Spiral bending device 
• Variable speed of rotation 
• Adjustable hydraulic guide rolls in two directions 
• Mechanical guide rolls for angle bending 
• NC playback control system 
• CNC graphic control system
PRO-100 Technical Infos PRO-100 Contact for this productPRO-120 (Compare With)
Profiles Sizes Ø * Profiles Sizes Ø * Profiles Sizes Ø *
  50x50x6
90x90x8
100x100x10
590
1000
1400
A
E
F
  30
50
60
400
600
800
A
F
  180x70
200x75
600
800
A
D
F
  50x50x6
80x80x8
100x100x12
800
1200
1600
A
E
  40
60
70
600
2000
3000
B   INP 80
INP 200
600
800
A
D
F
  100 1200 A   50x2
120x2
140x3
400
1000
1600
B   HEA 120
HEB 100
1000
1200
A
D
F
  100 1000 A   60.3x3.2
14.3x3.6
114.3x4.5
500
3000
4000
B       C
B
  120 1200 A   40x20x2
100x50x5
140x40x3
500
2500
4000
B   INP 120   C
B
  40x10
100x20
120x25
400
600
1600
A
F
  50x50x2.5
90x90x4
100x100x5
800
1200
3000
B       C
B
  60x10
100x40
200x35
400
500
1000
A
F
  180x70
200x75
800
1200
A
D
F
       

PRO-80

Hydraulic Profile Bending Machine

PRO-80 Click for Technical Informations.

Bendmak PRO-80 
*Explanations: 
A: Standard rolls. 
B: Special rolls. 
C: Pulling device 
D: For bending without deformation and for serial production special rolls are required 
E: Angle device 
F: Pulling device
Standard Features: 
• PRO 80 and PRO 60 are driven by hydraulic motor and gear system 
• All machine body manufactured of ST-52 special steel 
• Rolls and shafts are made of special steel (42CrMo4), with induction hardened and grinded 
• Vertical and horizontal working possibility 
• Guide rolls adjustment manually to one direction 
• Electrically protection against overloading 
• Digital readout for display the position of lower rolls 
• Independence movement of the bottom rolls up and down hydraulically 
• Portable control panel in order to control material from required location with foot pedal 
• Manual lubrication 
• In accordance with EU 

Optional Accessories: 
• Special profile rolls for bending pipe, H, I, U etc type materials 
• Hydraulic guide rolls in order to facilitate angle bending 
• Special mechanical guide rolls in order to facilitate angle bending 
• Digital readout for displaying the position of the hydraulic guide rolls (for PRO80) 
• Spiral bending device 
• NC playback and NC graphic control system 
• CNC graphic control system 
• Electric motors according to required voltage and frequency 
• Variable speed of rotation
PRO-80 Technical Infos PRO-80 Contact for this productPRO-60 (Compare With)
Profiles Sizes Ø * Profiles Sizes Ø * Profiles Sizes Ø *
  35x35x3
70x70x8
80x80x8
500
1200
1600
A
E
  50x10
80x20
120x30
260
400
600
A   50x25x2
80x40x5
100x40x3.2
600
2000
3000
B
  40x40x4
70x70x9
80x80x8
600
1000
2000
A
E
  30
40
45
300
500
1000
A   40x40x2.7
70x70x3.2
70x70x4
500
1600
3000
B
  70x30x4
70x70x8
80x80x8
400
1000
1400
A   35
50
60
300
500
1000
B   60x30x6
120x55x6
140x60x7.5
400
800
1200
A
D
  30x30x4
70x70x8
80x80x8
400
1000
1400
A   40x2
100x2
100x3
400
2400
3000
B   60x30x6
120x55x6
140x60x7.5
400
800
1200
A
D
  40x10
80x25
100x20
300
590
2100
A   48.3x3.2
88.9x3.2
88.9x4
400
1000
1600
B   INP 120 500 A
D

PRO-60

Hydraulic Profile Bending Machine

PRO-60 Click for Technical Informations.

Bendmak PRO-60 
*Explanations: 
A: Standard rolls. 
B: Special rolls. 
C: Pulling device 
D: For bending without deformation and for serial production special rolls are required 
E: Angle device 
F: Pulling device
Standard Features: 
• PRO 80 and PRO 60 are driven by hydraulic motor and gear system 
• All machine body manufactured of ST-52 special steel 
• Rolls and shafts are made of special steel (42CrMo4), with induction hardened and grinded 
• Vertical and horizontal working possibility 
• Guide rolls adjustment manually to one direction 
• Electrically protection against overloading 
• Digital readout for display the position of lower rolls 
• Independence movement of the bottom rolls up and down hydraulically 
• Portable control panel in order to control material from required location with foot pedal 
• Manual lubrication 
• In accordance with EU 

Optional Accessories: 
• Special profile rolls for bending pipe, H, I, U etc type materials 
• Hydraulic guide rolls in order to facilitate angle bending 
• Special mechanical guide rolls in order to facilitate angle bending 
• Digital readout for displaying the position of the hydraulic guide rolls (for PRO80) 
• Spiral bending device 
• NC playback and NC graphic control system 
• CNC graphic control system 
• Electric motors according to required voltage and frequency 
• Variable speed of rotation
PRO-60 Technical Infos PRO-60 Contact for this productPRO-80 (Compare With)
Profiles Sizes Ø * Profiles Sizes Ø * Profiles Sizes Ø *
  30x30x3
50x50x5
250
500
A
E
  50x5
80x16
80x20
200
400
1200
A   30x15x1.5
60x30x2.5
80x30x3
300
2000
6000
B
  30x30x3
40x40x5
50x50x6
400
600
1000
A
E
  15
30
35
300
600
1400
A   20x20x2
50x50x2.5
60x60x3
240
1600
4000
B
  30x30x3
80x40x7.5
300
600
A   20
35
40
300
600
800
B   30x15x4
60x30x6
80x45x6
300
400
800
A
D
  30x30x3
50x50x6
70x35x6
300
600
1000
A   25x1.5
60x2
70x2
200
800
1600
B   30x15x4
50x25x5
80x45x6
300
500
1000
A
D
  40x10
60x20
80x25
220
500
2100
A   26.5x2.3
48.3x2.9
60.3x3.2
200
600
1000
B       A
D

PRO-55

Hydraulic Profile Bending Machine

PRO-55 Click for Technical Informations.

Bendmak PRO-55 
*Explanations: 
A: Standard rolls. 
B: Special rolls. 
C: Pulling device 
D: For bending without deformation and for serial production special rolls are required 
E: Angle device 
F: Pulling device
Standard Features: 
• PRO55 and PRO60 are driven by hydraulic motor and gear system 
• All machine body manufactured of ST52 special steel 
• Rolls and shaft are made of special steel (42CrMo4) 
• Vertical and horizontal working possibility 
• Guide rolls adjustment manually to one direction 
• Electrically protection against overloading 
• Digital readout for displaying the position of lower rolls 
• Independence movement of the bottom rolls up and down hydraulically 
• Portable control panel in order to control material from required location with foot pedal 
• Manual lubrication 
• In accordance with EU norms 

Optional Accessories: 
• Special profile rolls for bending pipe, H,I,U etc type materials 
• Special mechanical guide rolls in order to facilitate angle bending 
• Digital readout for displaying the position of the bottom rolls 
• Spiral bending device 
• Variable speed of rotation 
• Electric motors according to required voltage and frequency 
• Two speed modes
PRO-55 Technical Infos PRO-55 Contact for this product PRO-42 (Compare With)
Profiles Sizes Ø * Profiles Sizes Ø * Profiles Sizes Ø *
  30x30x3
50x50x5
60x60x6
250
500
1000
A
E
  50x5
80x16
80x20
200
400
1200
A   30x15x1.5
60x30x2.5
80x30x3
300
2000
6000
B
  30x30x3
40x40x5
50x50x6
400
600
1000
A
E
  15
30
35
300
600
1400
A   20x20x2
50x50x2.5
60x60x3
240
1600
4000
B
  30x30x3
60x60x7
80x40x7
300
600
1000
A   20
35
40
300
600
800
B   30x15x4
60x30x6
80x45x6
300
400
800
A
D
  30x30x3
50x50x6
70x35x6
300
600
500
A   25x1.5
60x2
70x2
200
800
1600
B   30x15x4
60x30x6
80x45x6
350
500
1000
A
D
  20x10
50x12
50x15
200
400
1000
A   26.9x2.3
48.3x2.9
60.3x3.2
200
600
1000
B       A
D

PRO-50

Hydraulic Profile Bending Machine

PRO-50 Click for Technical Informations.

Bendmak PRO-50 
*Explanations: 
A: Standard rolls. 
B: Special rolls. 
C: Pulling device 
D: For bending without deformation and for serial production special rolls are required 
E: Angle device 
F: Pulling device
Standard Features: 
• Machine body manufactured of ST52 special steel 
• PRO 50 has got 3 driven rolls 
• Rolls and shafts are made of special steel, with induction hardened and grinded 
• Top roll is movable up and down hydraulically 
• Main motor with brake 
• Vertical and horizontal working possibility 
• Guide rolls adjustment manually to one direction 
• Portable control panel in order to control material from required locations 
• Manual lubrication 
• In accordance with EU norms 

Optional Accessories: 
• Digital readout display position of top roll 
• Special mechanical guide rolls in order to facilitate angle bending 
• Special profile rolls for bending pipe, H, I, U, etc type materials 
• Electric motor according to required voltage and frequency 
• Two speed modes
PRO-50 Technical Infos PRO-50 Contact for this product
Profiles Sizes Ø * Profiles Sizes Ø * Profiles Sizes Ø *
  50x5
25x3
600
350
A
E
  60x10
20x10
800
300
A   60x2.9
3/8"x2
1000
300
B
  45x5
25x5
600
400
A
E
  80x15 600 A   60x30x3   B
  50 600 A   32x32 590 B   45x45x3   B
  50 600 A   35 590 B   UNP 80 800 B
  50 600 A   60x2
15x1
1000
350
B   UNP 80 1200 B

PRO-42

Hydraulic Profile Bending Machine

PRO-42 Click for Technical Informations.

Bendmak PRO-42
*Explanations: 
A: Standard rolls. 
B: Special rolls. 
C: Pulling device 
D: For bending without deformation and for serial production special rolls are required 
E: Angle device 
F: Pulling device
PRO-42 Technical Infos PRO-42 Contact for this product PRO-55 (Compare With)
Profiles Sizes Ø * Profiles Sizes Ø * Profiles Sizes Ø *
  30x30x3
50x50x5
50x50x7
260
600
1000
A
E
  40x5
60x15
60x20
160
260
600
A   30x10x1.5
40x20x2.5
50x25x2.5
400
900
1200
B
  30x30x3
40x40x4
45x45x5
400
600
1200
A
E
  15
25
28
260
500
1200
A   20x20x1.5
40x40x2
45x45x2.5
400
1200
2000
B
  30x30x3
60x30x5
50x50x5
200
500
1000
A   20
28
30
160
300
600
B   30x15x4
50x25x5
60x30x6
300
500
800
A
D
  30x30x3
60x30x5
45x45x6
300
600
1200
A   25x1.5
50x1.8
60x20
300
1400
1600
B   30x15x4
50x25x5
60x30x6
260
500
590
A
D
  20x10
50x8
50x10
200
600
590
A   21.3x3.25
33.7x2.6
48.3x2.9
300
500
600
B       A
D

PRO-40

Hydraulic Profile Bending Machine

PRO-40 Click for Technical Informations.

Bendmak PRO-40 
*Explanations: 
A: Standard rolls. 
B: Special rolls. 
C: Pulling device 
D: For bending without deformation and for serial production special rolls are required 
E: Angle device 
F: Pulling device
Standard Features: 
• PRO 40 has got GGG quality cast iron body 
• PRO 30 has got steel body 
• Two bottom rolls are driven 
• Guide rolls adjustment manually to one direction 
• Portable control panel in order to control material from required locations with foot pedal 
• Shaft are made of special steel 
• In accordance with EU norm 

Optional Accessories: 
• Digital readout to display position of top roll 
• Special mechanical guide rolls in order to facilitate angle bending 
• Special profile rolls for bending pipe, H, I, U etc type materials 
• Electric motors according to required voltage and frequency 
• Two speed modes 
• Twisting device 
• Scrolling (s) device
PRO-40 Technical Infos PRO-40 Contact for this product
Profiles Sizes Ø * Profiles Sizes Ø * Profiles Sizes Ø *
  50x5 850 A
E
  60x10
50x12
800
800
A   33.7x2.65 320 B
  50x5 1200 A
E
  120x15 750 A   50x40x3   B
  50 650 A   35x35
20x20
1200
400
B   60x60x3 830 B
  50 900 A   35 800 B   UNP 60 550 B
  50 750 A   70x2 1200 B   UNP 60 590 B

PRO-30

Hydraulic Profile Bending Machine

PRO-30 Click for Technical Informations.

Bendmak PRO-30 
*Explanations: 
A: Standard rolls. 
B: Special rolls. 
C: Pulling device 
D: For bending without deformation and for serial production special rolls are required 
E: Angle device 
F: Pulling device
Standard Features: 
• PRO 40 has got GGG quality cast iron body 
• PRO 30 has got steel body 
• Two bottom rolls are driven 
• Guide rolls adjustment manually to one direction 
• Portable control panel in order to control material from required locations with foot pedal 
• Shaft are made of special steel 
• In accordance with EU norm 

Optional Accessories: 
• Digital readout to display position of top roll 
• Special mechanical guide rolls in order to facilitate angle bending 
• Special profile rolls for bending pipe, H, I, U etc type materials 
• Electric motors according to required voltage and frequency 
• Two speed modes 
• Twisting device 
• Scrolling (s) device
PRO-30 Technical Infos PRO-30 Contact for this product
Profiles Sizes Ø * Profiles Sizes Ø * Profiles Sizes Ø *
  40x5 400 A
E
  50x10 600 A   1 1/2" 900 B
  40x5 500 A
E
  80x15 590 A   50x30x3   B
  50x6 800 A   30x30 590 B   40x40x3   B
  50 850 A   30 590 B   UNP 50 400 B
  50 800 A   60x2 1200 B   UNP 50 500 B




כל הזכויות שמורות לגאיה יבוא ושיווק מכונות 1995 בע"מ ©